Solar storage system, including solar modules, controllers, inverters, batteries, loads and other equipment. At present, there are many technical routes, but the energy needs to be collected at a certain point. At present, there are mainly two topologies of DC coupling "DC Coupling" and AC coupling "AC Coupling". 1, DC coupling As shown in the figure below, the DC power generated by the photovolta...
According to the latest annual clean energy statistics report released by the International Renewable Energy Agency (IRENA), the installed capacity of off-grid photovoltaic systems installed around the world has barely increased since the outbreak of theCOVID-19 in 2020. According to the report released by the agency, most of the countries that own and operate off-grid PV systems aroun...
What is a DC arc? Arc is a kind of gas discharge phenomenon, the instantaneous spark generated by the current passing through some insulating medium, such as air, this is the arc. Both direct current and alternating current produce arcs. Sometimes when we plug in the socket, we will see a fire, which is a kind of AC arc. In a DC system, such as that caused by a string of photovoltaic cells, this a...
The dust falling on the surface of the photovoltaic module will block the sunlight on the one hand, reduce the transmittance of the surface glass of the photovoltaic module, and reduce the amount of solar radiation irradiated on the surface of the solar panel; It absorbs solar radiation and converts it into its own heat energy, and at the same time blocks the external heat dissipation of the photo...
As the "heart" of photovoltaic power generation, the health of the inverter is closely related to the smooth operation of the photovoltaic power generation system. It is necessary to understand common inverter alarms and accurately determine the cause of inverter alarms. 1. Inverter alarms not caused by internal devices If the screen or APP shows that the EEPROM fails, it can usually be repaired b...
In general, we call the process of converting DC power into AC power as inverter, the circuit that completes the inverter function is called inverter circuit, and the device that realizes the inverter process is called inverter equipment or inverter. Why are common grid-connected inverters only single-phase and three-phase? In fact, the main reason is the type of grid connected to the inverter. Fi...
The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...
With the gradual tightening of global energy supply and increasingly serious environmental pollution, independent and environment-friendly energy supply is becoming more and more important, and more and more households around the world choose to embrace this green energy transition with green electricity at home. However, in the face of the numerous and chaotic household energy storage products on...
Loads are classified into resistive loads, inductive loads, and capacitive loads according to their impedance properties. Resistive load: A load with no phase difference between current and voltage is a resistive load, such as rice cookers, light bulbs, electric stoves, electric soldering irons, etc. Inductive load: The load when the current lags the voltage by a phase difference is an inductive l...
The German government continues to address the energy crisis by implementing tax relief to support small photovoltaics. This time, the tax relief is aimed at supporting PV systems under 30kW. The new rules plan to start in early 2023, and any photovoltaic system operating on a single-family residential or commercial property with an output of up to 30kW will no longer be required to pay income tax...
Energy storage converter, also known as bidirectional energy storage inverter, English name PCS (Power Conversion System), is used in AC-coupled energy storage systems such as grid-connected energy storage and micro-grid energy storage, connecting battery packs and power grids (or load), it is a device that realizes bidirectional conversion of electric energy. It can not only invert the DC power o...
1. In order to prevent the photovoltaic modules from being hit by heavy objects, can a wire protection net be added to the photovoltaic array? Answer: It is not recommended to install wire protection nets. Because the addition of iron wire protection net to the photovoltaic array may cause partial shadows on the solar panels and form a hot spot effect, which will affect the power generation effici...
français
español
português
العربية
한국의
Polski
Tiếng Việt
čeština
български
IPv6 network supported
