On the 23rd local time, the Office of the US Trade Representative issued a statement announcing the re-exemption of tariffs on 352 items imported from China. The new regulations will apply to imports from China between October 12, 2021 and December 31, 2022. s product. Exempted items mainly include industrial components such as pumps and motors, auto parts, chemicals, backpacks, bicycles, v...
According to the latest annual clean energy statistics report released by the International Renewable Energy Agency (IRENA), the installed capacity of off-grid photovoltaic systems installed around the world has barely increased since the outbreak of theCOVID-19 in 2020. According to the report released by the agency, most of the countries that own and operate off-grid PV systems aroun...
The dust falling on the surface of the photovoltaic module will block the sunlight on the one hand, reduce the transmittance of the surface glass of the photovoltaic module, and reduce the amount of solar radiation irradiated on the surface of the solar panel; It absorbs solar radiation and converts it into its own heat energy, and at the same time blocks the external heat dissipation of the photo...
1 Photovoltaic connectors and power station benefits Usually, photovoltaic modules, inverters and combiner boxes are the main focus of daily maintenance of photovoltaic power plants, while the failure risk of some small components is easily overlooked, and photovoltaic connectors are the most representative cases. The photovoltaic connector accounts for less than 0.5% of the initial investment cos...
PID effect is Potential Induced Degradation. The direct harm of PID to the module is that a large amount of charge accumulates on the surface of the cell, which aggravates the passivation effect of the cell surface, resulting in a decrease in the fill factor, open-circuit voltage and short-circuit current of the cell, and the power of the cell module is attenuated, and the attenuation degree can r...
When designing the inclination of the photovoltaic array, there is a big difference between the grid-connected power station and the off-grid power station, because the goals pursued by the grid-connected power station and the off-grid power station are different when generating electricity. The goal of grid-connected power stations is to maximize the annual power generation, that is, the design o...
The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...
Loads are classified into resistive loads, inductive loads, and capacitive loads according to their impedance properties. Resistive load: A load with no phase difference between current and voltage is a resistive load, such as rice cookers, light bulbs, electric stoves, electric soldering irons, etc. Inductive load: The load when the current lags the voltage by a phase difference is an inductive l...
1. In order to prevent the photovoltaic modules from being hit by heavy objects, can a wire protection net be added to the photovoltaic array? Answer: It is not recommended to install wire protection nets. Because the addition of iron wire protection net to the photovoltaic array may cause partial shadows on the solar panels and form a hot spot effect, which will affect the power generation effici...
The warranty of a solar system involves solar panels, inverters, installations and various other components. Owners always want to be effectively guaranteed throughout the life cycle of the solar system, and they know that it is important to choose the right solar panels and inverters. , it is also important to know that these components are properly installed. But when it comes to warranty, there...
Structural analysis of photovoltaic modules The basic service life requirement of photovoltaic modules is that "after 25 years of outdoor work, it can still maintain 80% of the maximum output power of the initial value, and it is also required that it can effectively resist the impact of external forces. Photovoltaic modules are mainly composed of solar cells, backplanes, photovoltaic glass, packa...
Photovoltaic inverters are composed of circuit boards, fuses, power switch tubes, inductors, relays, capacitors, displays, fans, radiators, structural parts and other components. The service life of each component is different. The service life of the inverter can be explained by the "barrel theory". The maximum capacity of the barrel is determined by the shortest board, and the service life of th...
français
español
português
العربية
한국의
Polski
Tiếng Việt
čeština
български
IPv6 network supported
