A 7.7-magnitude earthquake hit southeastern Turkey near the Syrian border in the early morning of February 6, local time. The epicenter was located in Gaziantep Province, Turkey. Buildings collapsed on a large scale and tens of thousands of people were killed or injured. As of press time, there are still a series of aftershocks in the local area, and the scope of the earthquake's impact has expand...
The South Korean Ministry of Industry, Trade and Energy (MOTIE) approved a solar panel recycling program at a ministerial meeting held by Prime Minister Han Duk-soo a few days ago. It is reported that the new regulations establish a standardized collection system for each major region of the country to ensure that the recycling/reuse rate of waste solar panels exceeds 80%. At the same time, the pl...
Reasons for low insulation resistance: When the solar panels or DC cables and joints are damaged or the insulation layer is aging, the problem of low insulation resistance is easy to occur. When the DC cable passes through the bridge, since the edge of the metal bridge may have barbs, the outer insulation of the cable may be damaged during the threading process, resulting in leakage to the ground....
Inverters running in summer may feel hot to the touch due to their high shell temperature. And why does the casing feel hot? The following will do some analysis and answers for these two problems combined with inverter heat dissipation. The components in the inverter have their rated operating temperature. If the heat dissipation performance of the inverter is poor, as the inverter continues to wo...
The difference between lightning protection grounding and electrical grounding 1. Protective grounding refers to connecting the metal part of the electrical device that is not charged under normal conditions with the grounding device to prevent the part from being charged suddenly under fault conditions and causing harm to the human body. 2. Working grounding is to ground the neutral point of the ...
Photovoltaic inverters are composed of circuit boards, fuses, power switch tubes, inductors, relays, capacitors, displays, fans, radiators, structural parts and other components. The service life of each component is different. The service life of the inverter can be explained by the "barrel theory". The maximum capacity of the barrel is determined by the shortest board, and the service life of th...
At present, there are many models of inverters on the market. In order to simplify management and explore the advantages of centralized procurement, many EPC manufacturers often use limited inverter models to do as many field designs as possible, which will inevitably involve the reduction of inverters. Content usage issues. A small reduction in capacity is not a big problem; but a large reduction...
The power factor of the photovoltaic grid-connected inverter is a point that has to be mentioned in the technical parameters. In an AC circuit, the cosine of the phase difference (Φ) between the voltage and the current is called the power factor, which is represented by the symbol cosΦ. In terms of value, the power The factor is the ratio of active power to apparent power, that is, cosΦ=P/S. Gener...
Structural analysis of photovoltaic modules The basic service life requirement of photovoltaic modules is that "after 25 years of outdoor work, it can still maintain 80% of the maximum output power of the initial value, and it is also required that it can effectively resist the impact of external forces. Photovoltaic modules are mainly composed of solar cells, backplanes, photovoltaic glass, packa...
français
español
português
العربية
한국의
Polski
Tiếng Việt
čeština
български
IPv6 network supported
