Payment:
TT/LC/PAYPAL/WESTUNIONProduct Origin:
ChinaShipping Port:
Shanghai/Ningbo/ShenzhenLead Time:
20daysOrder(MOQ):
1Advantages
1.Mitsubishi IPM module structure design, easy and convenient for maintenance.
2.Little fault rate < 1%
3.Power frequency transformer, 100% full power stable output
4.High efficiency > 94%
5.Long service life > 15 years
6.Setting flexible: input and output voltage, frequency can be set
7.Two kinds of work mode: Variable frequency start and step down voltage start
8.Big LCD display all running parameters and fault code
9.RS485 monitoring optional
10.Can work 24h*7, durable and suitable for harsh environment
Structure
Connection port
Specification
Model |
SDP-200KW |
|
Isolation mode |
Low Frequency Transformer |
|
DC Input |
Rated voltage (Vdc) |
600V |
Rated current(A) |
333.3A |
|
AC Output |
Rated output power |
200KW |
Output waveform |
Pure Sine Wave |
|
Rated Voltage |
380VAC±3% |
|
Phases |
3 phase 4 wire |
|
Rated current(A) |
303A (phase current) |
|
Frequency |
50Hz or 60Hz |
|
Rated output voltage range (V) |
380/400/415/440VAC optional |
|
Power Factor(PF) |
0.9 |
|
Overload Ability |
150%, 5 seconds |
|
Efficiency |
>93% |
|
Waveform distortion rate (THD) |
≤2% (Linear load) ≤3% (The nonlinear loads)
|
|
Dynamic Response (0 to 100% load) |
5%,≤50ms |
|
Display |
LCD |
|
Running mode |
Working continuously |
|
Electrical insulation properties |
2000Vac, 1 Minute |
|
Protection Function |
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
Cooling method |
Fan-cooled |
|
Short-circuit protection |
No automatic recovery, need to restart the machine |
|
Working environment |
Noise ( 1 meter) |
≤50dB |
Degree of protection |
IP20(indoor) |
|
Working Altitude(m) |
≤2000 |
|
Working temperature |
-25~+55℃ |
|
relative humidity |
0~90%,non-condensing |
|
Mechanical dimension |
Depth* Width * Height |
1200x1200x1860mm |
Weight (Kg) |
1500Kg |
The 3kw solar inverter is integrated with MPPT solar charge controller inside. It can also connect to grid to take grid as backup when battery is over discharged. The output voltage is 120V, several pieces in parallel can get 120V/240V split phase. All of parameter such as working mode, charging current, over discharge voltage can be set as you wish.
The 5kw solar inverter is integrated with MPPT solar charge controller inside. It can also connect to grid to take grid as backup when battery is over discharged. The output voltage is 220V, maximum 6pcs in parallel. 3pcs in parallel can get three phase 380v output. All of parameter such as working mode, charging current, over discharge voltage can be set as you wish.
The solar power inverter is highly integrated with the digital technology, which can improve the MTBF and reliability of the system, the whole systems are controlled by an independent high-speed DSP chips which can ensure the stability and reliable operation. Optional power: 40kW 60kW 80kW 100kW 120kW 150kW 200kW Battery voltage: DC192V/DC216V/DC220V/DC240V/DC360V/DC384V Battery type: Gel battery or Lithium-ion battery AC output voltage: three phase 208V or 380V/400V/415V
This is a multifunctional off grid solar inverter, integrated with a MPPT solar charge controller, a low frequency pure sine wave inverter and a UPS function module in one machine, which is perfect for off grid backup power and self-consumption applications. This inverter can work with or without batteries. The whole system also need other devices to achieve complete running such as PV modules, generator, or utility grid. The wifi/GPRS module is a plug-and-play monitoring device to be installed on the inverter. With this device,, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.
The solar power inverter is highly integrated with the digital technology, which can improve the MTBF and reliability of the system, the whole systems are controlled by an independent high-speed DSP chips which can ensure the stability and reliable operation. Optional power: 40kW 60kW 80kW 100kW 120kW 150kW 200kW Battery voltage: DC192V/DC216V/DC220V/DC240V/DC360V/DC384V Battery type: Gel battery or Lithium-ion battery AC output voltage: three phase 208V or 380V/400V/415V
The solar power inverter is highly integrated with the digital technology, which can improve the MTBF and reliability of the system, the whole systems are controlled by an independent high-speed DSP chips which can ensure the stability and reliable operation. Optional power: 40kW 60kW 80kW 100kW 120kW 150kW 200kW Battery voltage: DC192V/DC216V/DC220V/DC240V/DC360V/DC384V Battery type: Gel battery or Lithium-ion battery AC output voltage: three phase 208V or 380V/400V/415V
What is off grid system? Off-grid solar energy systems are also called stand-alone solar systems. It does not connect with Grid or called Utility. It is very popular and suitable for remote areas where there is no public power or Public power is instable.It can be for Home applications, Commercial applications and Industrial applications. The off-grid solar energy system can be 1kW/2kW/3kW/5kW/10kW/12kW/16kW/20kW/24kW/30kW/50kW/80kW/100kW/120kW/ 150kW/200kW/Customized off-gid power system Off-grid system is suitable for areas without grid-connected or unstable grid-connected power. Off grid system is usually composed of solar panels, connector, inverter, batteries and mounting system. Description of 15kW solar panel system: Inverter power: 25kW AC output voltage: AC110V/120V Battery voltage: DC24V or DC48V Battery type: Gel battery or LiFePO4 battery Solar panel type: Mono or poly Compatible with grid and generator Monitor: WIFI or GPRS
The solar energy storage inverter can be used for both on grid and off grid solar systems, it integrates controller and inverter. During the daytime, the PV array generates electricity to provide power either to the loads, or to the grid or charge the battery. The battery can be charged either by PV power or by grid, the power stored in the battery can be released whenever the loads require it. Moreover ,the inverter can give three phase unbalanced output accroding to set up, to make a most flexible power solution.