PID effect is Potential Induced Degradation. The direct harm of PID to the module is that a large amount of charge accumulates on the surface of the cell, which aggravates the passivation effect of the cell surface, resulting in a decrease in the fill factor, open-circuit voltage and short-circuit current of the cell, and the power of the cell module is attenuated, and the attenuation degree can r...

As the "heart" of photovoltaic power generation, the health of the inverter is closely related to the smooth operation of the photovoltaic power generation system. It is necessary to understand common inverter alarms and accurately determine the cause of inverter alarms. 1. Inverter alarms not caused by internal devices If the screen or APP shows that the EEPROM fails, it can usually be repaired b...

Loads are classified into resistive loads, inductive loads, and capacitive loads according to their impedance properties. Resistive load: A load with no phase difference between current and voltage is a resistive load, such as rice cookers, light bulbs, electric stoves, electric soldering irons, etc. Inductive load: The load when the current lags the voltage by a phase difference is an inductive l...

Energy storage converter, also known as bidirectional energy storage inverter, English name PCS (Power Conversion System), is used in AC-coupled energy storage systems such as grid-connected energy storage and micro-grid energy storage, connecting battery packs and power grids (or load), it is a device that realizes bidirectional conversion of electric energy. It can not only invert the DC power o...

At present, there are many models of inverters on the market. In order to simplify management and explore the advantages of centralized procurement, many EPC manufacturers often use limited inverter models to do as many field designs as possible, which will inevitably involve the reduction of inverters. Content usage issues. A small reduction in capacity is not a big problem; but a large reduction...

Photovoltaic inverters are composed of circuit boards, fuses, power switch tubes, inductors, relays, capacitors, displays, fans, radiators, structural parts and other components. The service life of each component is different. The service life of the inverter can be explained by the "barrel theory". The maximum capacity of the barrel is determined by the shortest board, and the service life of th...

Inverters running in summer may feel hot to the touch due to their high shell temperature. And why does the casing feel hot? The following will do some analysis and answers for these two problems combined with inverter heat dissipation. The components in the inverter have their rated operating temperature. If the heat dissipation performance of the inverter is poor, as the inverter continues to wo...

On the evening of July 11, Deye shares issued an announcement saying that recently, the company found that the micro-inverters produced and sold by the company reported by the media were inconsistent with the certification. The article mainly questioned the micro-inverters sold by the company to Germany because of The lack of relays does not meet the German VDE4105 grid-connected certification con...

Advantages of solar power generation system 1. The solar power generation system has good durability, is resistant to salt spray and corrosion, and can withstand the maximum wind pressure of 2400Pa and snow pressure of 5400pa; 2. The annual attenuation is less than 7%, and the power generation performance can still be maintained at more than 80% in 25 years; 3. The system power generation can be m...