PID effect is Potential Induced Degradation. The direct harm of PID to the module is that a large amount of charge accumulates on the surface of the cell, which aggravates the passivation effect of the cell surface, resulting in a decrease in the fill factor, open-circuit voltage and short-circuit current of the cell, and the power of the cell module is attenuated, and the attenuation degree can r...

When designing the inclination of the photovoltaic array, there is a big difference between the grid-connected power station and the off-grid power station, because the goals pursued by the grid-connected power station and the off-grid power station are different when generating electricity. The goal of grid-connected power stations is to maximize the annual power generation, that is, the design o...

The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...

Definition of state of charge (SOC) and depth of discharge (DOD) and their impact on lifespan of lifepo4 battery 1. State of Charge (SOC, State of Charge): In layman's terms, it is the ratio of the power stored in the battery (releasable capacity) to the maximum power that the battery can store. For example, if a battery with a maximum capacity of 100Ah(fully charged) is fully discharged to 5...

First of all, the basis of the working principle of solar cells is the photovoltaic effect of the semiconductor PN junction. The so-called photovoltaic effect is an effect in which electromotive force and current are generated when the object is illuminated, the state of charge distribution in the object changes. When sunlight or other light hits the PN junction of the semiconductor, a voltage app...

Loads are classified into resistive loads, inductive loads, and capacitive loads according to their impedance properties. Resistive load: A load with no phase difference between current and voltage is a resistive load, such as rice cookers, light bulbs, electric stoves, electric soldering irons, etc. Inductive load: The load when the current lags the voltage by a phase difference is an inductive l...

1. In order to prevent the photovoltaic modules from being hit by heavy objects, can a wire protection net be added to the photovoltaic array? Answer: It is not recommended to install wire protection nets. Because the addition of iron wire protection net to the photovoltaic array may cause partial shadows on the solar panels and form a hot spot effect, which will affect the power generation effici...

There are various currents inside the cell, such as dark current, reverse current, leakage current, etc. Various currents have a greater or lesser impact on the power of solar panels. Distinguishing the characteristics of various currents can identify the cause of abnormal solar panel power and help solve the problem completely. dark current Dark current (DarkCurrent), also known as unilluminated ...

Inverters running in summer may feel hot to the touch due to their high shell temperature. And why does the casing feel hot? The following will do some analysis and answers for these two problems combined with inverter heat dissipation. The components in the inverter have their rated operating temperature. If the heat dissipation performance of the inverter is poor, as the inverter continues to wo...

Reasons for low insulation resistance: When the solar panels or DC cables and joints are damaged or the insulation layer is aging, the problem of low insulation resistance is easy to occur. When the DC cable passes through the bridge, since the edge of the metal bridge may have barbs, the outer insulation of the cable may be damaged during the threading process, resulting in leakage to the ground....

On the evening of July 11, Deye shares issued an announcement saying that recently, the company found that the micro-inverters produced and sold by the company reported by the media were inconsistent with the certification. The article mainly questioned the micro-inverters sold by the company to Germany because of The lack of relays does not meet the German VDE4105 grid-connected certification con...